Sliding Windows
The standard choice for most rooms — no swing space needed inside or out.
- 2 track and 3 track
- Mesh track option
- Interlock with EPDM seal
- SS 304 rollers
- Multi-point lock option
Windows & Doors
uPVC Windows & Doors
Sliding and casement windows, sliding and openable doors — made to your opening size in multi-chamber uPVC profile and fitted square, sealed and smooth-running.
uPVC Windows & Doors
Quiet, sealed and easy to run — for years, not months.
uPVC earns its place in a Tamil Nadu home for three reasons: it does not rust or rot, the gaskets keep dust and rain out, and a correctly fitted sash still slides with one finger years later.
All of that depends on the fitting. We measure the opening, fabricate the unit to that size, and set it plumb and level with proper packing and sealant — which is what separates a window that seals from one that whistles.
See completed work
What We Make
Window and door types we supply and fit.
Every unit is made to your measured opening — there are no fixed catalogue sizes to design around.
Casement Windows
Openable sash on hinges — the best seal and full opening for ventilation.
- Side-hung and top-hung
- Fixed + openable combinations
- Friction stay hinges
- Multi-point locking
- Mesh shutter option
Sliding Doors
For balconies, terraces and courtyard openings, in two, three or four panels.
- 2, 3 and 4 panel
- Heavy-duty bottom rollers
- Toughened glass option
- Low threshold detail
- Integrated mesh panel
uPVC Doors
Openable doors for bathrooms, utility areas, balconies and rear entrances.
- Casement and French doors
- Bathroom / utility doors
- Louvre and panel infill
- Water-resistant profile
- Lever lock hardware
Fixed & Ventilators
Fixed glazing for light and small ventilators for kitchens and bathrooms.
- Fixed picture units
- Top ventilators
- Louvre ventilators
- Exhaust fan cut-outs
- Combination frames
Custom Sizes
Odd-shaped, arched, tall or extra-wide openings handled as a made-to-size unit.
- Arched and angled heads
- Full-height glazing
- Corner window joints
- Coupling and mullion joints
- Replacement of old frames
Materials & Specifications
Profile, glass, hardware and mesh options.
Typical specification — the final combination is confirmed against your opening, floor level and exposure.
| Profile | Multi-chamber uPVC, lead-free — 60 mm and 80 mm series depending on panel size and wind load |
|---|---|
| Reinforcement | Galvanised steel core inside the profile on frames and sashes carrying weight |
| Glazing | 4 mm, 5 mm and 6 mm plain, tinted, frosted or toughened; double glazing on request |
| Gaskets | EPDM gaskets on frame and sash — the part that decides dust and rain performance |
| Hardware | SS 304 rollers, friction stay hinges, touch and multi-point locks |
| Mesh | Integrated mesh track, mesh shutter or separate mesh panel — see Mosquito Mesh |
| Colours | White, wood-grain laminate and colour-coated finish options |
| Fixing | Fixed with anchor fasteners, packed level, sealed externally with weather-grade silicone |
Replacing old wooden or aluminium frames? Send a photo of the existing opening on WhatsApp — most replacements are handled without breaking the plaster.
Benefits
Why uPVC works well here.
01
No rust or rot
It does not corrode near the coast or swell in monsoon humidity the way timber and steel frames do.
02
Dust and rain sealed
EPDM gaskets and a correctly closed interlock keep road dust and driven rain outside.
03
Quieter rooms
The sealed profile with proper glazing noticeably cuts street and traffic noise.
04
Almost no upkeep
Wipe clean. No painting, no polishing, no annual maintenance cost.
Project Gallery
uPVC work we have completed.
Windows and doors fitted in homes and commercial spaces.
Why AV FAB.TECH
Work that fits, first time.
Made to your measurements
Every gate, window and mesh panel is fabricated to the dimensions taken at your site — not cut down from a standard size.
Right material for the job
We advise the section, thickness and finish that suits your opening, budget and exposure, and confirm it before work starts.
Clean installation
Fitting, alignment and finishing are handled by our own team, so the work is left square, level and ready to use.
One point of contact
Fabrication, uPVC and mesh work are all handled in-house — you deal with one team from measurement to handover.
Get in Touch
Send your uPVC Windows & Doors requirement.
Share your measurements, a drawing or a photo of the opening and we will confirm the material, design and quotation.
WhatsApp Us
Phone+91 70107 43874
Phone+91 94434 00686
Emailinfo@avfabtech.com
Workshop
AV FAB.TECH, Aruna Nagar,
Karaikudi, Tamil Nadu – 630002
Karaikudi, Tamil Nadu – 630002